pipewire (0.3.45-2) unstable; urgency=medium * Team upload. * Re-enable aptX support, add libfreeaptx-dev to BD (Closes: #1005801) -- Dylan Aïssi Tue, 15 Feb 2022 11:18:05 +0100 pipewire (0.3.45-1) unstable; urgency=medium * Team upload. * New upstream release * Don't install new filter-chain example conf file * Update symbols file * Adapt lintian overrides to the new output * Standards-Version: 4.6.0 (no changes required) -- Dylan Aïssi Thu, 03 Feb 2022 21:42:07 +0100 pipewire (0.3.44-1) unstable; urgency=medium * Team upload. * New upstream release * Add libcanberra-dev to Build-Depends * Bump minimum meson to 0.59 * Install new usr/share/pipewire/minimal.conf in pipewire-bin -- Dylan Aïssi Thu, 27 Jan 2022 16:24:40 +0100 pipewire (0.3.43-2) unstable; urgency=medium * Team upload. * Skip the new test pw-test-pipewire-alsa-stress, this test runs an infinite loop. -- Dylan Aïssi Tue, 11 Jan 2022 12:10:22 +0100 pipewire (0.3.43-1) unstable; urgency=medium * Team upload. * New upstream release * Refresh d/p/Don-t-build_same_binary_twice.patch * Bump minimum meson to 0.56 -- Dylan Aïssi Mon, 10 Jan 2022 10:54:04 +0100 pipewire (0.3.42-1) unstable; urgency=medium * Team upload. [ Sebastien Bacher ] * debian/rules: - disable the new lv2 option on Ubuntu, lilv and its depends (serd, sord, sratom) are currently in universe (Closes: #1001691) [ Dylan Aïssi ] * New upstream release -- Dylan Aïssi Fri, 17 Dec 2021 10:19:36 +0100 pipewire (0.3.41-1) unstable; urgency=medium * Team upload. * New upstream release * Add libssl-dev and liblilv-dev to Build-Depends * Update symbols file * Set Rules-Requires-Root: no -- Dylan Aïssi Mon, 13 Dec 2021 12:09:33 +0100 pipewire (0.3.40-2) unstable; urgency=medium * Team upload. * Change back priority order between pipewire-media-session and wireplumber. Pipewire-media-session is enough for the current default usage of pipewire in Debian (i.e. screen recording). Having Wireplumber with a higher priority leads to install by default pipewire-pulse and consequently to replace pulseaudio by pipewire as sound server. See #999363. . WirePlumber is still the recommended session manager for users who want to use pipewire as sound server. The priority order will be changed again once we will decide to use pipewire as default sound server. -- Dylan Aïssi Wed, 24 Nov 2021 15:07:07 +0100 pipewire (0.3.40-1) unstable; urgency=medium * Team upload. * New upstream release * Drop patches included in upstream release: - fix_compilation_on_armel.patch - fix_compilation_on_some_architectures.patch - make_insert_at()_fail_on_a_removed_item.patch - fix_type_for_big_endian.patch - only_run_SSE_when_supported.patch * Install a new manpage for pipewire-pulse * Update symbols file -- Dylan Aïssi Fri, 12 Nov 2021 22:08:23 +0100 pipewire (0.3.39-4) unstable; urgency=medium * Team upload. * Update d/watch to point to gitlab.freedesktop.org/pipewire instead of a mirror. * Add an upstream patch to only run SSE when supported (Closes: #998129, #998130) * Build zeroconf modules (Closes: #998218) - Add libavahi-client-dev in Build-Deps * Add patch to don't build same binary twice (Closes: #998126) Thanks to Michael Biebl * Add dbus-user-session in Recommends (Closes: #982853, #998167) * Re-add pipewire-media-session as an alternative to Wireplumber, it is now back in the archive as a separate source package. -- Dylan Aïssi Mon, 08 Nov 2021 13:29:23 +0100 pipewire (0.3.39-3) unstable; urgency=medium * Team upload. * Remove pipewire-media-session from Recommends. (Closes: #995116, #996994, #997859) -- Dylan Aïssi Wed, 27 Oct 2021 21:09:13 +0200 pipewire (0.3.39-2) unstable; urgency=medium * Team upload. * Add upstream patches: - fix pw_map_insert_at and pw_map_item - fix compilation on armel -- Dylan Aïssi Mon, 25 Oct 2021 17:23:25 +0200 pipewire (0.3.39-1) unstable; urgency=medium * Team upload. * New upstream release * Don't build the pipewire-media-session binary package anymore, media-session has moved to a separate module to accelerate its deprecation in favour of WirePlumber. * Change priority order between pipewire-media-session and wireplumber, WirePlumber is now the recommended session manager. * Install pw-v4l2 and libpw-v4l2.so in pipewire-bin and libpipewire-0.3-modules, respectively. * Drop d/p/fix-compilation-on-ARM.patch, included in upstream release * Add an upstream patch to fix compilation on some architectures * Update symbols file -- Dylan Aïssi Thu, 21 Oct 2021 17:14:22 +0200 pipewire (0.3.38-2) unstable; urgency=medium * Team upload. * Add an upstream patch to fix compilation on ARM -- Dylan Aïssi Fri, 01 Oct 2021 11:44:51 +0200 pipewire (0.3.38-1) unstable; urgency=medium * Team upload. * New upstream release * Drop d/p/fix-msbc-with-linux-5.14.patch, included in upstream release * Add libreadline-dev to Build-Depends * Update symbols file -- Dylan Aïssi Fri, 01 Oct 2021 10:07:52 +0200 pipewire (0.3.37-2) unstable; urgency=medium * Team upload. * Add an upstream patch to support msbc with kernel 5.14.x. -- Dylan Aïssi Mon, 27 Sep 2021 10:57:25 +0200 pipewire (0.3.37-1) unstable; urgency=medium * Team upload. * New upstream release * Install pw-dsdplay in pipewire-bin * Update symbols file * Move bluez-hardware.conf from pipewire-media-session to libspa-0.2-bluetooth because this hardware quirk database is now loaded by the plugin instead of the session manager. This database is now installed into /usr/share/spa-0.2/bluez5/ instead of /usr/share/pipewire/media-session.d/ -- Dylan Aïssi Thu, 23 Sep 2021 17:56:09 +0200 pipewire (0.3.36-1) unstable; urgency=medium * Team upload. [ Arto Jantunen ] * pipewire-bin: Recommend rtkit (Closes: #984429) [ Dylan Aïssi ] * New upstream release -- Dylan Aïssi Thu, 16 Sep 2021 21:50:44 +0200 pipewire (0.3.35-1) unstable; urgency=medium * Team upload. * New upstream release * Replace xmltoman by python3-docutils in BD to generate manpages * Don't install new filter-chain example conf files * Update symbols file -- Dylan Aïssi Thu, 09 Sep 2021 21:49:29 +0200 pipewire (0.3.34-1) unstable; urgency=medium * Team upload. * New upstream release * Don't install sink-convolver.conf (filter-chain example configuration) * Update symbols file -- Dylan Aïssi Thu, 26 Aug 2021 20:53:42 +0200 pipewire (0.3.33-1) unstable; urgency=medium * Team upload. * New upstream release * Disable aptX support for now, upstream has switched from libopenaptx to libfreeaptx (not yet in Debian) * Upload to unstable as Bullseye was released. -- Dylan Aïssi Mon, 16 Aug 2021 11:44:56 +0200 pipewire (0.3.32-1) experimental; urgency=medium * Team upload. * New upstream release * Update symbols file -- Dylan Aïssi Wed, 21 Jul 2021 12:14:03 +0200 pipewire (0.3.31-1) experimental; urgency=medium * Team upload. * New upstream release * Add libusb-1.0-0-dev to Build-Depends * Disable roc module at least for now * Install bluez-hardware.conf in pipewire-media-session * Update symbols file -- Dylan Aïssi Tue, 29 Jun 2021 12:09:29 +0200 pipewire (0.3.30-1) experimental; urgency=medium * Team upload. * New upstream release * Remove d/p/Let-pipewire-pulse-services-conflict-with-their-pulseaudi.patch, applied upstream. * Add libwebrtc-audio-processing-dev to Build-Depends * Update symbols file * Remove unused lintian override in pipewire-audio-client-libraries -- Dylan Aïssi Wed, 16 Jun 2021 12:07:16 +0200 pipewire (0.3.28-1) experimental; urgency=medium [ Frédéric Danis ] * Split pipewire-media-session from pipewire-bin package * Split pipewire-pulse from pipewire-bin package [ Sjoerd Simons ] * Install user systemd units by default * Update readme for seperate pipewire-pulse * New upstream release * Disable avahi module at least for now * Don't install the filter-chain example configurations * Update libpipewire-0.3-0 symbol file * Remove configuration files that moved to /usr/share -- Sjoerd Simons Sat, 22 May 2021 16:19:10 +0200 pipewire (0.3.27-1) experimental; urgency=medium * New upstream release -- Sjoerd Simons Wed, 12 May 2021 20:37:03 +0200 pipewire (0.3.26-1) experimental; urgency=medium * New upstream release * Add libpipewire-0.3-common to hold the translation files * Install pw-link in pipewire-bin * Update libpipewire-0.3-0 symbols -- Sjoerd Simons Sun, 25 Apr 2021 20:54:29 +0200 pipewire (0.3.25-1) experimental; urgency=medium * New upstream release * Install pw-loopback tool in pipewire-bin -- Sjoerd Simons Fri, 09 Apr 2021 21:57:09 +0200 pipewire (0.3.24-3) experimental; urgency=medium * debian/rules: Disable ldac on arches where it's not available. This isn't available on these arches. piepwire FTBFS otherwise as it tries to find it. -- Iain Lane Thu, 25 Mar 2021 00:01:00 +0000 pipewire (0.3.24-2) experimental; urgency=medium * Move doxygen/graphviz into Build-Depends; Fixes arch only build failures * Re-add support for nodocs builds * run wrap-and-sort -- Sjoerd Simons Fri, 19 Mar 2021 16:57:32 +0100 pipewire (0.3.24-1) experimental; urgency=medium * New upstream release * Adjust builds options to cope with pipewire switching more options to features, actual options used are unchanged -- Sjoerd Simons Thu, 18 Mar 2021 20:46:29 +0100 pipewire (0.3.23-1) experimental; urgency=medium * New upstream release * Update symbols file * debian/pipewire.install - Install new pipewire-media-session.service * d/d/p/bluez5-volumes-need-to-be-distributed-to-all-channels.patch d/p/bluez5-set-the-right-volumes-on-the-node.patch d/p/policy-node-don-t-crash-without-metadata.patch - Dropped; All included in upstream release * Refreshed patches -- Sjoerd Simons Fri, 05 Mar 2021 20:21:46 +0100 pipewire (0.3.22-2) experimental; urgency=medium [ Daniel van Vugt ] * Fix "the metadata crash" (LP: #1916716). Using upstream commit 3673265ae20d7b59e89cad6c5238c232796731b2 which is scheduled for inclusion in release 0.3.23. -- Iain Lane Thu, 04 Mar 2021 11:09:52 +0000 pipewire (0.3.22-1) experimental; urgency=medium * Team upload * New upstream release * d/p/bluez5-volumes-need-to-be-distributed-to-all-channels.patch d/p/bluez5-set-the-right-volumes-on-the-node.patch: - Fix volume control on bluetooth devices * d/libpipewire-0.3-0.symbols: - Add new symbols * debian/pipewire-bin.install - Install new confiration file (bluez, v4l and client config) -- Sjoerd Simons Sat, 20 Feb 2021 21:50:40 +0100 pipewire (0.3.19-4) unstable; urgency=medium * Team upload * Disable GStreamer device provider. Apparently it isn't ready, and breaks video recording in cheese. Thanks to Fedora (see also Red Hat bug 1884260). (Closes: #982636) -- Simon McVittie Sat, 13 Feb 2021 10:49:02 +0000 pipewire (0.3.19-3) unstable; urgency=medium * Team upload * Don't enable audio-related plugins by default. Using pipewire for audio is considered experimental for Debian 11, and in particular the with-pulseaudio flag file will result in PulseAudio and Pipewire fighting over Bluetooth devices. - If you're experimenting with pipewire-pulse, please see /usr/share/doc/pipewire-audio-client-libraries/README.Debian for details of how to re-enable these. * Install brief documentation of how to experiment with Pipewire for audio. There should eventually be a pipewire-pulse package that sets up the PulseAudio replacement automatically, and perhaps a pipewire-jack package that does the equivalent for the JACK libraries, but these are rather new and don't seem to be ready for general use in Debian 11. -- Simon McVittie Fri, 29 Jan 2021 15:55:13 +0000 pipewire (0.3.19-2) unstable; urgency=medium * Team upload * Depend on openaptx with #980297 fixed, instead of working around it * Don't depend on libldac on big-endian architectures. It currently only compiles on little-endian architectures (#980372). -- Simon McVittie Mon, 18 Jan 2021 11:58:41 +0000 pipewire (0.3.19-1) unstable; urgency=medium * Team upload * New upstream release (Closes: #979309) - Fix cleanup of acp card objects (Closes: #979537) - Provide pipewire-pulse, pipewire's replacement for the PulseAudio daemon (Closes: #976654). Note that this is not enabled by default for bullseye. systemd user units to start it can be found in /usr/share/doc/pipewire/examples/systemd/user. * Drop patch, applied upstream * Remove pw-pulse from pipewire-audio-client-libraries, no longer supported upstream * Fix installation path for example 99-pipewire-default.conf * Install example ld.so.conf.d fragments into /usr/share/doc/pipewire/examples/ld.so.conf.d to replace libjack with Pipewire as suggested by upstream. These can be copied into /etc/ld.so.conf.d if desired. This is not done by default and is considered to be experimental * Add Build-Conflicts with non-free libfdk-aac-dev. This makes the build more predictable by not compiling a plugin that would depend on that library. * d/control: Add new dependencies for Bluetooth codecs * Build-depend on libncurses-dev for the new pw-top utility * d/copyright: Update * d/pipewire-bin.install: Install pw-dump and pw-top * Don't automatically start pipewire for root logins (Closes: #979791) * Standards-Version: 4.5.1 (no changes required) * Update symbols file * Remove unnecessary RUNPATH from bluez5 plugin (workaround for #980297) * Silence library-not-linked-against-libc lintian error for JACK libraries. These libraries genuinely don't directly need anything from glibc. -- Simon McVittie Sun, 17 Jan 2021 13:38:28 +0000 pipewire (0.3.15-1) unstable; urgency=medium * Team upload * New upstream release - Disable the pulse-bridge module by default. This should only be used if completely replacing PulseAudio with PipeWire, which Debian is definitely not ready to do. - Disable the bluez5 module by default (previously a Debian and Fedora patch). This should also only be used if completely replacing PulseAudio with PipeWire. - Various other bug fixes * Drop patch to disable bluez5 plugin. This should no longer be necessary. * d/p/protocol-native-do-version-check-on-HELLO.patch: Add patch (from upstream, via Fedora) to fix interop with older clients -- Simon McVittie Thu, 05 Nov 2020 18:10:32 +0000 pipewire (0.3.14-1) unstable; urgency=medium * Team upload * New upstream release - Avoid colliding with PulseAudio (Closes: #970760) * d/pipewire-bin.install: Install pw-reserve -- Simon McVittie Wed, 04 Nov 2020 09:48:08 +0000 pipewire (0.3.12-1) unstable; urgency=medium * Team upload * New upstream release - Configuration in ~/.pipewire-media-session is no longer used. If you have configuration in that location, please move it into $XDG_CONFIG_HOME/pipewire-media-session, defaulting to $HOME/.config/pipewire-media-session if $XDG_CONFIG_HOME is not set. It will not be migrated automatically. * d/p/Link-pipewire-jack-to-libatomic-if-required.patch: Drop, applied upstream * Move libspa-0.2-modules dependency from -modules to shared library. The shared library calls into the support module, as seen in the autopkgtest. * Stop pipewire-audio-client-libraries depending on libpulse. If we are using PipeWire's emulation of libpulse-simple.so.0, we'll also be using PipeWire's emulation of libpulse.so.0, so there's no point in depending on the real PulseAudio libpulse.so.0. * d/rules: Sort Meson options alphabetically * d/tests/gstreamer1.0-pipewire: Add a superficial test for the plugin. This would reproduce #919880, if it comes back. -- Simon McVittie Sat, 19 Sep 2020 15:59:33 +0100 pipewire (0.3.10-4) unstable; urgency=medium * Team upload * Release to unstable (starts transition: #966535) -- Simon McVittie Thu, 10 Sep 2020 09:12:14 +0100 pipewire (0.3.10-3) experimental; urgency=medium * Team upload * d/rules: Adjust test timeouts again, based on feedback from the buildds. mips* now get 10 times as long as fast architectures, and ia64 is added to the list of slowish architectures that get 5 times as long. * d/p/Link-pipewire-jack-to-libatomic-if-required.patch: Update patch to the version that was applied upstream -- Simon McVittie Tue, 08 Sep 2020 21:06:23 +0100 pipewire (0.3.10-2) experimental; urgency=medium * Team upload * Use debhelper compat level 13. This runs 'meson test' rather than 'ninja test', which will make it easier to expand the test timeout. * Increase test timeout on slower architectures. The resampling tests can be a bit slow, particularly on architectures without a real FPU. * d/p/Link-pipewire-jack-to-libatomic-if-required.patch: Add patch to fix FTBFS on armel (and hopefully also mipsel) by explicitly linking to libatomic where needed. -- Simon McVittie Sun, 06 Sep 2020 21:03:55 +0100 pipewire (0.3.10-1) experimental; urgency=medium * Team upload. [ Laurent Bigonville ] * New upstream release (Closes: #954022) - 0.3.x fixes FTBFS with gcc 10 (Closes: #957685) - debian/control: Adjust the build-dependencies - Bump the soname of the libraries - Ship the new plugins (jack and vulkan) in new packages - Re-enable some plugins that were enabled before but disabled in this release * Drop debian/pipewire.links, with debhelper 12, dh_installsystemduser is called during the build process and it's taking care of enabling the systemd user service and socket (Closes: #953216) * Rename libpipewire-0.2-doc to pipewire-doc as the documentation is not installed in a versinized directory * debian/control: Bump Standards-Version to 4.5.0 (no further changes) * debian/rules: Tell dh_shlibdeps to also search for the private libraries * debian/pipewire.install: Install the control audioconvert and videoconvert module in the main package, they are not pulling new dependencies [ Debian Janitor ] * Set upstream metadata fields: Repository, Repository-Browse. * Update standards version to 4.4.1, no changes needed. [ Simon McVittie ] * New upstream release * Version the names of the plugin packages. They're installed in a versioned directory, and this package is going to have to go through NEW anyway if there are incompatible changes to SPA (0.3 or 1.0). * d/copyright: Update * d/libpipewire-0.3-0.symbols: Update * Move executables and modules to their own packages. PipeWire clients have to load some of the SPA and PipeWire modules into their own address space, so it makes sense for the pipewire package to be Multi-Arch: same, with a dependency on the modules for the necessary architecture. This means the parts that would collide have to be split out into a -bin package, which in turn needs a dependency on the modules themselves (for its architecture). * Put pipewire, pipewire-bin in Section: video. The focus is currently on its video role rather than on its audio role, and we don't have a Section: multimedia for things that do both. Either audio or video seems more appropriate than Section: net, since pipewire is not network-transparent. * Separate out a Multi-Arch: same pipewire-audio-client-libraries package. Using PipeWire for audio is considered experimental, so we probably don't want xdg-desktop-portal and gnome-shell to pull this in. - Reduce libpulse-mainloop-glib's GLib dependency to a Recommends. It's a hard requirement for that library, but any application that would be linked to it must already have a GLib dependency. * Improve various package descriptions * Disable ffmpeg and vulkan plugins. According to upstream developer George Kiagiadakis, these are not practically useful. * d/p/conf-disable-bluez5.patch: Disable BlueZ support by default. PipeWire is intended to be a suitable replacement for PulseAudio eventually, but at the moment only the video side is ready for production use, with the audio side considered experimental. For ordinary ALSA audio devices, it is harmless to have audio support available in PipeWire, because both PipeWire and PulseAudio will close the audio device when not in use, so they can coexist (as long as you do not try to use both at the same time). However, Bluetooth audio devices need to be configured even when not in active use, so they would fight. Patch taken from Fedora. Thanks to Wim Taymans * d/shlibs.local: Generate lockstep dependencies between binaries. Upstream developers are never going to support mixing libraries from different builds of PipeWire, and neither should we. * Install automated tests and example programs into a new pipewire-tests package. - d/p/spa-examples-Load-plugins-from-SPA_PLUGIN_DIR-or-installe.patch, d/p/Optionally-install-examples-and-tests.patch: Make the tests and examples installable - d/tests/gnome-desktop-testing: Run most of the tests * d/tests/manual.md: Add some manual test instructions. Ideally some of these would be automated into autopkgtests (we can't assert that we hear a sound, but we can at least assert that aplay exits successfully) but for now they are just manual tests. * pipewire-tests: Override custom-library-search-path Lintian tag. Some of these tests use a RUNPATH to link to libraries from pipewire itself. * Install symlinks to pw-cat(1) for its various aliases * d/rules: Update exclusion paths for dh_makeshlibs * Set upstream metadata fields: Bug-Database, Bug-Submit * Rename libspa-lib-0.2-dev to libspa-0.2-dev. There used to be a shared library named libspa-lib, but recent versions have moved to a purely header- and plugin-based system, making the -lib postfix meaningless. * Break out SPA modules into libspa-0.2-modules. This will make compatibility more straightforward if PipeWire and SPA break API/ABI out of sync with each other. Thanks to Sjoerd Simons * Document more ways to test bits of PipeWire manually [ Andreas Henriksson ] * New upstream release (0.3.10) * Update libpipewire-0.3-0.symbols with new additions * Improve pipewire short description * debian/copyright: Add module-portal.c and Red Hat -- Andreas Henriksson Mon, 24 Aug 2020 16:03:42 +0200 pipewire (0.2.7-1) unstable; urgency=medium * New upstream release * debian/libpipewire-0.2-1.symbols: Update * Build-Depend on debhelper-compat 12 and drop debian/compat -- Jeremy Bicha Fri, 01 Nov 2019 21:50:48 -0400 pipewire (0.2.5-1) unstable; urgency=medium [ Jeremy Bicha ] * New upstream release * Bump minimum meson to 0.47 * debian/libpipewire-0.2-1.symbols: Add new symbol * Drop all patches: applied in new release * Bump Standards-Version to 4.3.0 [ Laurent Bigonville ] * debian/libpipewire-0.2-1.symbols: Add the Build-Depends-Package annotation * debian/control: Set Section to net for the main pipewire package (Closes: #908524) -- Jeremy Bicha Fri, 04 Jan 2019 14:24:46 -0500 pipewire (0.2.3-3) unstable; urgency=medium * Team upload. * Make libpipewire-0.2-dev depend against libspa-lib-0.1-dev (Closes: #909623) * Enable pipewire.socket by default (Closes: #909625) -- Laurent Bigonville Wed, 26 Sep 2018 01:40:56 +0200 pipewire (0.2.3-2) unstable; urgency=medium * Make libpipewire-0.2-dev depend against libspa-lib-0.1-dev (Closes: #909623) * Enable pipewire.socket by default (Closes: #909625) -- Laurent Bigonville Wed, 26 Sep 2018 01:40:45 +0200 pipewire (0.2.3-1) unstable; urgency=medium * New upstream release * Drop make-spa-lib-version.patch: Applied in new release * debian/rules: Update configure options * libspa-lib-0.1-1 has been dropped in this release * debian/libpipewire-0.2-1.symbols: Update * Cherry-pick 7 commits since last release -- Jeremy Bicha Wed, 19 Sep 2018 19:48:19 -0400 pipewire (0.2.2-1) unstable; urgency=medium * Initial release (Closes: #874089) -- Jeremy Bicha Mon, 13 Aug 2018 11:17:57 -0400