openvswitch (2.6.1-0ubuntu5) zesty; urgency=medium * Enable openvswitch-switch-dpdk for ppc64el (LP: #1663206) - debian/control: add ppc64el architecture to package and build dependency - debian/rules: build and test openvswitch-switch-dpdk for ppc64el -- Christian Ehrhardt Thu, 09 Feb 2017 11:02:44 +0100 openvswitch (2.6.1-0ubuntu4) zesty; urgency=medium * No change rebuild against refreshed DPDK 16.11-1ubuntu1 -- Christian Ehrhardt Tue, 31 Jan 2017 09:42:34 +0100 openvswitch (2.6.1-0ubuntu3) zesty; urgency=medium * No change rebuild against DPDK 16.11 (was DPDK stuck in NEW before) -- Christian Ehrhardt Thu, 19 Jan 2017 14:02:45 +0100 openvswitch (2.6.1-0ubuntu2) zesty; urgency=medium * No change rebuild against DPDK 16.11 -- Christian Ehrhardt Thu, 19 Jan 2017 12:26:31 +0100 openvswitch (2.6.1-0ubuntu1) zesty; urgency=medium * New upstream point release (LP: #1641956). * d/openvswitch-switch.openvswitch-nonetwork.service: Update Unit definition to ensure that openvswitch starts prior to configuration of any network interfaces (LP: #1448254). Thanks to Mark Dunn for this fix. -- James Page Tue, 15 Nov 2016 14:15:06 +0000 openvswitch (2.6.0-0ubuntu2) yakkety; urgency=medium * Updates to cover the new way Openvswitch is configurging DPDK (LP: #1625542) - d/openvswitch-switch.default - d/openvswitch-switch-dpdk.README.Debian - drop d/p/ovs-ctl-dpdk.patch -- Christian Ehrhardt Tue, 04 Oct 2016 11:07:08 +0200 openvswitch (2.6.0-0ubuntu1) yakkety; urgency=medium * New upstream release: - d/rules: Update SKIP_TEST numbers inline with upstream. -- James Page Wed, 28 Sep 2016 13:09:26 +0100 openvswitch (2.6.0~git20160912.dc61b4e-0ubuntu4) yakkety; urgency=medium * d/rules: Correct SKIP_TEST 1149 -> 1150 (racey on arm64). -- James Page Thu, 15 Sep 2016 09:18:59 +0100 openvswitch (2.6.0~git20160912.dc61b4e-0ubuntu3) yakkety; urgency=medium * d/rules: Tidy SKIP_TEST list, document in rules file actual test failures as test numbers change between releases. -- James Page Wed, 14 Sep 2016 18:02:24 +0100 openvswitch (2.6.0~git20160912.dc61b4e-0ubuntu2) yakkety; urgency=medium * d/rules: Re-enable previously disabled SKIP_TEST list; builds under load still exhibit races in a number of tests. -- James Page Tue, 13 Sep 2016 14:37:51 +0100 openvswitch (2.6.0~git20160912.dc61b4e-0ubuntu1) yakkety; urgency=medium * New upstream snapshot from branch-2.6 (LP: #1609846). * d/rules: Skip test 1866 on ppc64el. * d/rules: Re-enable all tests across other archs. -- James Page Mon, 12 Sep 2016 22:42:46 +0100 openvswitch (2.6.0~git20160822.2cff273-0ubuntu1) yakkety; urgency=medium * New upstream snapshot from branch-2.6. * d/rules: Switch to branch-2.6 now its been cut upstream. -- James Page Mon, 22 Aug 2016 11:48:27 +0100 openvswitch (2.6.0~git20160810.7f5f2bd-0ubuntu3) yakkety; urgency=medium * Revert DPDK support on arm64. -- James Page Fri, 12 Aug 2016 08:25:57 +0100 openvswitch (2.6.0~git20160810.7f5f2bd-0ubuntu2) yakkety; urgency=medium * Enable dpdk builds for arm64. * Generalize blacklist of racey/failing unit tests. -- James Page Thu, 11 Aug 2016 21:59:17 +0100 openvswitch (2.6.0~git20160810.7f5f2bd-0ubuntu1) yakkety; urgency=medium * New upstream snapshot for 2.6.0 release goal. * d/control: Bumped Standards-Version to 3.9.8, no changes. * d/openvswitch-common.install: Drop ovs-benchmark tool, removed upstream due to lack of use and maintenance. * d/control,ovn-controller-vtep.*: Add ovn-controller-vtep package. * d/openvswitch-switch.install: Add ovs-tcpdump binary and manpage. * Add support for Python 3: - d/control: Drop surplus Python 2 BD's, add BD's for Python 3. - d/control: Add missing dependency on python-six. - d/rules,control: Add python3-openvswitch package. * d/rules: Skip racey/failing tests until resolved upstream. -- James Page Thu, 11 Aug 2016 17:53:28 +0100 openvswitch (2.5.0-0ubuntu1) xenial; urgency=medium * New upstream release. -- James Page Thu, 10 Mar 2016 14:09:14 +0000 openvswitch (2.5.0~git20160219.522aca6-0ubuntu3) xenial; urgency=medium * d/rules,control,openvswitch-switch-dpdk.*: Install DPDK enabled binaries into a new package (replacing the one from src:openvswitch-dpdk) rather than shipping alongside the vanilla binaries (LP: #1550254). * d/openvswitch-switch.*: Tidy up alternatives related to ovs-vswitchd-dpdk in 2.5.0~git20160219.522aca6-0ubuntu2. * d/tests/*: Refactor, exercise vanilla and dpdk enabled binaries where possible. -- James Page Fri, 26 Feb 2016 12:39:27 +0000 openvswitch (2.5.0~git20160219.522aca6-0ubuntu2) xenial; urgency=medium * [9c970b06] d/rules,*.manpages,*.install: Prepare for dual build. * [f7dff3e7] DPDK enablement (LP: #1492186): - d/p/system-dpdk.patch: Pick patch from openvswitch-dpdk to support use with libdpdk-dev. - d/control: Add DPDK dependencies for supported archs. - d/rules: Build DPDK enabled binaries for supported archs. - d/openvswitch-switch.p*: Install ovs-vswitch-dpdk binary as an alternative. - d/openvswitch-switch.README.Debian: Let users know how to use the DPDK binary. -- James Page Wed, 24 Feb 2016 21:44:41 +0000 openvswitch (2.5.0~git20160219.522aca6-0ubuntu1) xenial; urgency=medium * [7c4c30b] Imported upstream snapshot 2.5.0~git20160219.522aca6. -- James Page Fri, 19 Feb 2016 13:51:49 +0000 openvswitch (2.5.0~git20160129.46a88d9-0ubuntu1) xenial; urgency=medium * [099b995] d/rules: Switch to 2.5 branch for snapshots. * [aee4d60] Imported upstream snapshot 2.5.0~git20160129.46a88d9 * [b5d8f41] d/p/*: Refresh patches. * [97855b9] d/control,ovn*: Sync packaging changes from upstream for experimental OVN support. * [5c2ef1d] d/*.init: Tidy up init.d-script-does-not-source-init-functions lint. * [f3434f7] d/control: Add dh-python to BD's. * [81a7cca] d/control: Fixup breaks/replaces for upgrades. * [c19cf60] d/*.init Ensure _SYSTEMCTL_SKIP_REDIRECT is set prior to inclusion of init-functions. * [a7d5430] d/openvswitch-switch.openvswitch-nonetwork.service: Pass OVS_CTL_OPTS instead of OPTIONS to ovs-ctl on startup. * [d19098f] d/p/ovs-ctl-dpdk.patch: Sort out tab/space formatting. * [9e3989e] d/control: Add libcap-ng-dev to BD's to support running ovs daemons as non-root users. -- James Page Fri, 29 Jan 2016 11:44:50 +0100 openvswitch (2.4.0-0ubuntu5) xenial; urgency=high * Skip tests on s390x, for the same reason as powerpc see 1483572. -- Dimitri John Ledkov Tue, 26 Jan 2016 10:38:48 +0000 openvswitch (2.4.0-0ubuntu4) wily; urgency=medium [ Arata Notsu ] * Fix ifupdown hooks in cases where BRIDGE is not defined. (LP: #1314887) -- Chris J Arges Thu, 15 Oct 2015 15:03:34 -0500 openvswitch (2.4.0-0ubuntu3) wily; urgency=medium [ Brian Turek ] * Add ifupdown hooks for upstart script. (LP: #1314887) -- Chris J Arges Wed, 14 Oct 2015 13:51:13 -0500 openvswitch (2.4.0-0ubuntu2) wily; urgency=medium * Install ovs-vswitchd binary using alternatives for all architectures to support use of alternative DPDK enabled binaries (LP: #1499759): - d/rules: Move ovs-vswitchd to /usr/lib/openvswitch-switch. - d/openvswitch-switch.{postinst,prerm}: Install binary using alternatives. - d/openvswitch-switch.default: Add some example DPDK options (disabled by default). - d/p/ovs-ctl-dpdk.patch: Splice in DPDK options to ovs-vswitchd startup arguments if provided. -- James Page Mon, 28 Sep 2015 16:29:30 +0100 openvswitch (2.4.0-0ubuntu1) wily; urgency=medium * Update to 2.4.0 release from previous snapshot. -- James Page Tue, 01 Sep 2015 11:53:49 +0100 openvswitch (2.4.0~git20150810.97bab95-0ubuntu2) wily; urgency=medium * d/rules: Skip unit tests on powerpc - see https://pad.lv/1483572 for full details. -- James Page Tue, 11 Aug 2015 09:26:13 +0100 openvswitch (2.4.0~git20150810.97bab95-0ubuntu1) wily; urgency=medium * New upstream snapshot from 2.4 branch: - d/*: Align any relevant packaging changes with upstream. * d/*: wrap-and-sort. * d/openvswitch-{common,vswitch}.install: Correct install location for bash completion files. * d/tests/openflow.py: Explicitly use ovs-testcontroller as provided by 2.4.0 release. -- James Page Mon, 10 Aug 2015 11:35:15 +0100 openvswitch (2.3.2-0ubuntu3) wily; urgency=medium * d/tests/openflow.py: Use net.addLink to add links between switches and hosts to ensure that they get cleanup up after use, fixing autopkgtest failures. -- James Page Fri, 17 Jul 2015 12:48:25 +0100 openvswitch (2.3.2-0ubuntu2) wily; urgency=medium * d/p/rules: Skip test 717 due to failure on powerpc - see http://pad.lv/1472202 for full details. -- James Page Tue, 07 Jul 2015 11:15:12 +0100 openvswitch (2.3.2-0ubuntu1) wily; urgency=medium * New upstream point release. * Refresh all patches. -- James Page Tue, 30 Jun 2015 14:34:02 +0100 openvswitch (2.3.1-0ubuntu1) vivid; urgency=low * New upstream release. * d/rules,*.manpages: Rewrite to use more standard debhelper sequencing. * d/automake.mk,openvswitch-switch.default,rules: Rename openvswitch-switch.template -> openvswitch-switch.default. * Enable systemd support: - d/openvswitch-switch.service, d/openvswitch-switch.openvswitch-nonetwork.service: Systemd unit files, derived from RHEL versions. - d/control: Add BD on dh-systemd. - d/rules: Enable systemd helper, explicit no-start install of openvswitch-nonetwork unit. - d/ifupdown.sh: Tweak to support use with systemd ifinstalled. * d/control: Bumped Standards-Version 3.9.6, no changes. * d/tests/common: Drop module reload checks, as we always use the in-tree kernel module now. * d/python-openvswitch.*,openvswitch-test.*,automake.mk: Tidy up install of Python components. -- James Page Thu, 18 Dec 2014 12:36:25 +0000 openvswitch (2.3.0+git20140819-2ubuntu2) vivid; urgency=medium * Resolve DEP-8 test failures: - d/tests/openflow.py: Explicitly configure switches to use OpenFlow 1.0 protocol. - d/tests/control: Version dependency on mininet >= 2.2.0~ to support specification of protocol version. * d/tests/openflow.py: format to flake8 standard. -- James Page Mon, 24 Nov 2014 14:41:55 +0000 openvswitch (2.3.0+git20140819-2ubuntu1) vivid; urgency=medium * Merge from Debian unstable, remaining changes: - d/control,tests: Add autopkg tests. - d/control,openvswitch-testcontroller*: Add binary package for test controller to support use with mininet. - d/rules,*.upstart: Add upstart configurations for openvswitch-switch. - d/p/xcp-interface-reconfigure.patch: Add support for Debian packaged xcp-xapi if found. - d/rules: Ensure dh_autoreconf_clean is called. - d/rules: Add helper for generating snapshot from upstream git repo. - d/control,compat: Bump debhelper compat level to 9. - d/control: Bump Standards-Version to 3.9.5, no changes. - d/control: Add alternative dependency - kmod | module-init-tools. * d/control: Add missing ${shlibs:Depends} to openvswitch-testcontroller. * d/tests/*: Drop dkms and module assistant tests now that we no longer ship the datapath kernel module. * d/rules: Align snapshot creation to new repo location and 2.3 branch. -- James Page Wed, 12 Nov 2014 14:03:17 +0000 openvswitch (2.3.0+git20140819-2) unstable; urgency=low * debian/rules: Rerun checks on tests that fail the first time. Skip tests 711, 712, and 713 that seem to fail due to races on buildds. * debian/patches/cfm-avoid-long-delay: Upstream patch to avoid test failures in CFM tests due to "long delay" log messages at WARN level. * debian/patches/ovs-appctl-log-options.patch, debian/patches/disable-poll-loop-logging-for-long-output.patch: Upstream patches to avoid test failures in tests that generate a ton of output. -- Ben Pfaff Wed, 20 Aug 2014 08:31:11 -0700 openvswitch (2.3.0+git20140819-1) unstable; urgency=low * New upstream release: - OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in ovs-vswitchd. - Linux kernel datapath now has an exact match cache optimizing the flow matching process. - Datapath flows now have partially wildcarded tranport port field matches. This reduces userspace upcalls, but increases the number of different masks in the datapath. The kernel datapath exact match cache removes the overhead of matching the incoming packets with the larger number of masks, but when paired with an older kernel module, some workloads may perform worse with the new userspace. * Removed datapath packages because Linux 3.16 has adequate built-in support. Closes: #740983. - debian/control: Remove datapath package references. Add build dependency on dh-autoreconf. - debian/rules: Don't build datapath packages. - debian/openvswitch-datapath-*: Removed. - debian/control.modules.in: Removed. - debian/dkms.conf.in: Removed. - debian/rules.modules: Removed. - debian/openvswitch-switch.README.Debian: Removed references to kernel packages. - debian/openvswitch-switch.init: Removed references to kernel packages. - debian/automake.mk: Remov references to deleted files. - debian/rules: Adopt use of dh-autoreconf. -- Ben Pfaff Tue, 19 Aug 2014 08:19:21 -0700 openvswitch (2.3.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in ovs-vswitchd. - Linux kernel datapath now has an exact match cache optimizing the flow matching process. - Datapath flows now have partially wildcarded tranport port field matches. This reduces userspace upcalls, but increases the number of different masks in the datapath. The kernel datapath exact match cache removes the overhead of matching the incoming packets with the larger number of masks, but when paired with an older kernel module, some workloads may perform worse with the new userspace. -- Open vSwitch team Thu, 14 Aug 2014 11:03:32 -0700 openvswitch (2.2.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - Internal ports are no longer brought up by default, because it should be an administrator task to bring up devices as they are configured properly. - ovs-vsctl now reports when ovs-vswitchd fails to create a new port or bridge. - The "ovsdbmonitor" graphical tool has been removed, because it was poorly maintained and not widely used. - New "check-ryu" Makefile target for running Ryu tests for OpenFlow controllers against Open vSwitch. See INSTALL for details. - Added IPFIX support for SCTP flows and templates for ICMPv4/v6 flows. - Upon the receipt of a SIGHUP signal, ovs-vswitchd no longer reopens its log file (it will terminate instead). Please use 'ovs-appctl vlog/reopen' instead. - Support for Linux kernels up to 3.14. From Kernel 3.12 onwards OVS uses tunnel API for GRE and VXLAN. - Added experimental DPDK support. - Added support for custom vlog patterns in Python -- Open vSwitch team Wed, 19 Mar 2014 16:08:38 -0700 openvswitch (2.1.3-0ubuntu1) utopic; urgency=medium * New upstream release. * d/control: Drop hardening-wrapper from build Depends. * d/compat,control: Bump debhelper compat level to 9. -- James Page Fri, 15 Aug 2014 09:17:45 +0100 openvswitch (2.1.2-0ubuntu3) utopic; urgency=medium * Ensure test-controller is built on all architectures: - d/control: Introduce new openvswitch-testcontroller package. - d/{openvswitch-testcontroller,openvswitch-test}.{install,manpages}: Move test-controller binary to new testcontroller package. - d/tests/control: Use openvswitch-testcontroller instead of openvswitch-test. -- James Page Mon, 02 Jun 2014 13:02:01 +0100 openvswitch (2.1.2-0ubuntu2) utopic; urgency=high * No change rebuild against new dh_installinit, to call update-rc.d at postinst. -- Dimitri John Ledkov Wed, 28 May 2014 10:41:42 +0100 openvswitch (2.1.2-0ubuntu1) utopic; urgency=medium * New upstream release: - d/*: Resync packaging with upstream: + Drop openvswitch-{controller,pki} and ovsdbmonitor packages. + Drop openvswitch-pki targets from automake.mk. + Add openvswitch-vtep package. - d/tests/control,common: Drop use of openvswitch-controller in preference of openvswitch-test. - d/openvswitch-test.{install,manpages}: Provide test-controller for continued use by mininet for ovs testing. -- James Page Mon, 19 May 2014 14:05:29 +0100 openvswitch (2.1.0+git20140411-3) unstable; urgency=low * debian/rules: Disable some tests that tend to fail on Debian buildds due to race conditions. -- Ben Pfaff Fri, 13 Jun 2014 06:07:31 -0700 openvswitch (2.1.0+git20140411-2) unstable; urgency=low * debian/openvswitch-switch.postinst: Add back mysteriously deleted "mkdir" line. Closes: #744769. Thanks to Joshua Powers for reporting this bug. * debian/rules: Try rechecking in serial any tests that fail in parallel, as an experiment to see whether this fixes remaining buildd test failures. -- Ben Pfaff Mon, 14 Apr 2014 08:29:33 -0700 openvswitch (2.1.0+git20140411-1) unstable; urgency=low * New upstream release: - Removed ovsdbmonitor package. Closes: #744136. - Fix misaligned data accesses that caused test failures. * tests/ofproto-macros.at: Disable scanning logs for WARN and ERR messages, as an experiment to see whether this fixes all the buildd test failures. -- Ben Pfaff Fri, 11 Apr 2014 08:35:10 -0700 openvswitch (2.1.0+git20140325-1) unstable; urgency=low * New upstream release. - Included kernel module builds against Linux 3.11. Closes: #732260. - Log rotation bug fixed. Closes: #729304. - Bridge compatibility feature removed. Closes: #680538, #681954. - Controller package removed. Closes: #731133. * Shut down OVS after libvirt guests to allow those guests to remove their interfaces gracefully. Closes: #701760. Reported by Ernesto Domato . Fix from Lukasz Szotek . * debian/control: Depend on kmod instead of module-init-tools. Closes: #733696. Reported by md@Linux.IT (Marco d'Itri). -- Ben Pfaff Mon, 31 Mar 2014 09:31:10 -0700 openvswitch (2.0.1+git20140120-0ubuntu2) trusty; urgency=medium * Rebuild to drop files installed into /usr/share/pyshared. -- Matthias Klose Sun, 23 Feb 2014 13:49:27 +0000 openvswitch (2.0.1+git20140120-0ubuntu1) trusty; urgency=medium * New upstream snapshot: - d/p/0001-Add-check-for-latomic.patch: Dropped - included in snapshot. * d/p/fix-3.11-support.patch: Cherry pick fix for >= 3.11 GRE support from upstream VCS (LP: #1270649). * d/tests/dkms,ma: Gate test execution on <= 3.13 kernel. -- James Page Mon, 20 Jan 2014 12:55:24 +0000 openvswitch (2.0.1+git20140106-0ubuntu1) trusty; urgency=medium * New upstream snapshot. -- James Page Mon, 06 Jan 2014 17:32:42 +0000 openvswitch (2.0.0+git20131203-0ubuntu1) trusty; urgency=low * New upstream snapshot. * d/rules: Switch snapshot branch to branch-2.0. * Rework checks for -latomic: - d/p/0001-Add-check-for-latomic.patch: Add autoconf checks to see if -latomic is required when linking test-atomic. - d/p/atomic-test.patch: Dropped in preference to new patch. -- James Page Thu, 05 Dec 2013 10:08:20 +0000 openvswitch (2.0.0-0ubuntu3) trusty; urgency=low * d/rules,control: Switch to using dh-autoreconf for clean package builds. * d/p/kernel-3.12-support.patch: Add support for 3.12 kernel. * d/tests/control,kernel,common: Add kernel test to exercise in-tree openvswitch module, run openflow test against all module sources instead of standalone at the end of other tests. -- James Page Mon, 11 Nov 2013 12:23:01 +0000 openvswitch (2.0.0-0ubuntu2) trusty; urgency=low * d/p/atomic-test.patch: Link atomic test with -latomic for powerpc. -- Adam Conrad Sun, 03 Nov 2013 21:07:20 -0700 openvswitch (2.0.0-0ubuntu1) trusty; urgency=low * New upstream release: - d/p/kernel-3.11-support.patch: Cherry picked fix from upstream VCS for 3.11 kernel support. - Drop all other patches, no longer required. * d/p/xcp-interface-reconfigure.patch: Detect and use packaged XCP XAPI interface-reconfigure hook if installed (LP: #1195053). -- James Page Mon, 28 Oct 2013 13:15:45 +0000 openvswitch (1.10.2-0ubuntu2) saucy; urgency=low * d/p/boot.patch: Re-execution of boot.sh to ensure that new files introduced via patches are included in the dkms and source packages (LP: #1229222). -- James Page Mon, 23 Sep 2013 15:50:06 +0100 openvswitch (1.10.2-0ubuntu1) saucy; urgency=low * New upstream point release. -- James Page Sat, 07 Sep 2013 08:48:22 +0100 openvswitch (1.10.1+git20130823-0ubuntu3) saucy; urgency=low * d/openvswitch-switch.openvswitch-force-reload-kmod.upstart: Deal with instances where openvswitch-switch is not already running, use modprobe -r instead of rmmod to remove kernel modules. -- James Page Wed, 28 Aug 2013 13:32:38 +0100 openvswitch (1.10.1+git20130823-0ubuntu2) saucy; urgency=low * Fully support transitions from openvswitch module in 3.11 kernel to DKMS module: - d/openvswitch-switch.openvswitch-force-reload-mod.upstart: Drop the gre module when force reloading to make transitions from native kernel module to dkms module work. - d/NEWS: Drop information about DKMS/kernel compatibility with GRE tunnels. -- James Page Sat, 24 Aug 2013 09:41:02 +0100 openvswitch (1.10.1+git20130823-0ubuntu1) saucy; urgency=low * New upstream snapshot. - d/p/*.patch: Rebase on 1.10 branch with upstream submitted fixes for Linux 3.11 kernel compatibility (LP: #1213879). - d/NEWS: Add note about GRE tunnel support in the Linux 3.11 native kernel module with advice on use of -dkms package in this configuration. * Add Upstart configuration for openvswitch-switch (LP: #1084028): - d/openvswitch-switch.upstart: Add upstart configuration to support use during early boot. - d/rules,openvswitch-switch.openvswitch-force-reload-mod.upstart: Add helper to replace 'service openvswitch-switch force-reload-kmod'. - d/openvswitch-switch.preinst: Stop versions earlier than this version prior to install due to switch to upstart configuration. - d/NEWS: Let users know about this change and how to force a reload of the openvswitch kernel module. - d/tests/dkms,common: Update to work with upstart configuration. -- James Page Fri, 23 Aug 2013 11:18:52 +0100 openvswitch (1.10.1+git20130627-0ubuntu2) saucy; urgency=low * Allow compile with Linux 3.11 kernel - d/p/0005-datapath-Allow-compile-with-linux-3.11.patch Extend version checking to include the new kernel version. -- Stefan Bader Sat, 03 Aug 2013 12:12:08 +0100 openvswitch (1.10.1+git20130627-0ubuntu1) saucy; urgency=low * New upstream snapshot: - d/p/0007-tests-Tolerate-init-process-pid-1.patch: Dropped; included in snapshot. - d/p/*lacp*: Drop patches related to lacp test changes; not required for this series. - d/*: Sync relevant packaging changes. * Provide initial support for Linux 3.10 kernel: - d/p/0004-datapath-Fixup-compatibility-with-linux-3.10.patch: Fixup compatibility with Linux 3.10; this is not full support for all new 3.10 features - it simply maintains compatibility for the existing codebase. * d/rules: Add get-orig-snapshot target for creating snapshots from upstream VCS. -- James Page Mon, 01 Jul 2013 09:45:12 +0100 openvswitch (1.10.0-0ubuntu5) saucy; urgency=low * d/p/0007-tests-Tolerate-init-process-pid-1.patch: Resync with upstream accepted fix for FTBFS with upstart user sessions enabled, supercedes fix-init-user-sessions.patch with a more reliable test. -- James Page Fri, 21 Jun 2013 09:43:18 +0100 openvswitch (1.10.0-0ubuntu4) saucy; urgency=low * Fix FTBFS when upstart user sessions are enabled: - d/p/fix-init-user-sessions.patch: init is not pid == 1 when building on Ubuntu with user sessions enabled; just check that the cmd name of the init process is 'init' instead. -- James Page Thu, 20 Jun 2013 18:46:17 +0100 openvswitch (1.10.0-0ubuntu3) saucy; urgency=low * d/rules: Disable testing on powerpc architecture https://bugs.launchpad.net/ubuntu/+source/openvswitch/+bug/1189408. -- James Page Mon, 10 Jun 2013 11:20:56 +0100 openvswitch (1.10.0-0ubuntu2) saucy; urgency=low * Fix FTBFS on powerpc architecture: - d/p/{0004,0005,0006}*.patch: Cherry picked fixes from upstream VCS for failing lacp test. -- James Page Mon, 10 Jun 2013 10:30:10 +0100 openvswitch (1.10.0-0ubuntu1) saucy; urgency=low * New upstream release: - d/p/handle-unix-socket-long-paths.patch: Dropped - included upstream. - d/control,NEWS: Drop openvswitch-brcompat package as feature has been dropped upstream, added NEWS entry to let users know. - d/tests: Update tests to drop brcompat module testing. * Add support for Linux 3.9 kernel (LP: #1180385): - d/p/0001-datapath-hlist-drop-the-node-parameter-from-iterator.patch: Cherry picked fix from upstream master branch to remove dropped node parameter from hlist calls. - d/p/0002-Add-support-for-linux-3.9-kernel.patch: Include the 3.9 kernel in the list of supported kernel versions. - d/p/0003-datapath-Backport-simplified-hlist-iterators.patch: Cherry picked fix to provide backported hlist iterators for older kernels. - d/rules: Always run boot.sh to pickup above changes. -- James Page Mon, 03 Jun 2013 15:40:43 +0100 openvswitch (1.9.3+git20131029-1) unstable; urgency=low * New upstream release. - Fixes opening Unix sockets with very long names from Python. -- Ben Pfaff Tue, 29 Oct 2013 08:31:55 -0700 openvswitch (1.9.3+git20131028-1) unstable; urgency=low * New upstream release. - Fixes "make check" with non-ASCII characters in present working directory. Closes: #719736. -- Ben Pfaff Mon, 28 Oct 2013 08:40:31 -0700 openvswitch (1.9.3+git20131021-1) unstable; urgency=low * New upstream version: - Fixes unaligned access issues in bug #719736. - Other bug fixes. * Other half of bug #719736 has probably not been addressed. I don't understand it and want to see if it recurs in the autobuilders with the unaligned accesses fixed. -- Ben Pfaff Mon, 21 Oct 2013 08:53:11 -0700 openvswitch (1.9.3-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - Bug fixes -- Open vSwitch team Thu, 29 Aug 2013 17:02:33 -0700 openvswitch (1.9.2+git20130813-1) unstable; urgency=low * New upstream version. Closes: #701758. - debian/patches: All patches dropped because they have been incorporated upstream. - Supports kernels up to 3.8. Closes: #710125. -- Ben Pfaff Fri, 07 Jun 2013 14:15:01 -0700 openvswitch (1.9.2-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - Bug fixes -- Open vSwitch team Fri, 05 Apr 2013 18:37:19 -0700 openvswitch (1.9.1-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - Bug fixes -- Open vSwitch team Tue, 14 Mar 2013 17:27:19 -0700 openvswitch (1.9.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - Datapath: - Support for ipv6 set action. - SKB mark matching and setting. - support for Linux kernels up to 3.8 - FreeBSD is now a supported platform, thanks to code contributions from Gaetano Catalli, Ed Maste, and Giuseppe Lettieri. - ovs-bugtool: New --ovs option to report only OVS related information. - New %t and %T log escapes to identify the subprogram within a cooperating group of processes or threads that emitted a log message. The default log patterns now include this information. - OpenFlow: - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL fields in IPv6 neighbor discovery messages, and IPv6 flow label. - Adds support for writing to the metadata field for a flow. - Tunneling: - The tunneling code no longer assumes input and output keys are symmetric. If they are not, PMTUD needs to be disabled for tunneling to work. Note this only applies to flow-based keys. - New support for a nonstandard form of GRE that supports a 64-bit key. - Tunnel Path MTU Discovery default value was set to 'disabled'. This feature is deprecated and will be removed soon. - Tunnel header caching removed. - ovs-ofctl: - Commands and actions that accept port numbers now also accept keywords that represent those ports (such as LOCAL, NONE, and ALL). This is also the recommended way to specify these ports, for compatibility with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers for these ports for different purposes). - ovs-dpctl: - Support requesting the port number with the "port_no" option in the "add-if" command. - ovs-pki: The "online PKI" features have been removed, along with the ovs-pki-cgi program that facilitated it, because of some alarmist insecurity claims. We do not believe that these claims are true, but because we do not know of any users for this feature it seems better on balance to remove it. (The ovs-pki-cgi program was not included in distribution packaging.) - ovsdb-server now enforces the immutability of immutable columns. This was not enforced in earlier versions due to an oversight. - The following features are now deprecated. They will be removed no earlier than February 2013. Please email dev@openvswitch.org with concerns. - Bridge compatibility. - Stable bond mode. - The autopath action. - Interface type "null". - Numeric values for reserved ports (see "ovs-ofctl" note above). - Tunnel Path MTU Discovery. - CAPWAP tunnel support. - The data in the RARP packets can now be matched in the same way as the data in ARP packets. -- Open vSwitch team Tue, 26 Feb 2013 11:23:19 -0700 openvswitch (1.9.0-0ubuntu1) raring; urgency=low * New upstream release. * Added watch file. -- James Page Fri, 01 Mar 2013 14:25:54 +0000 openvswitch (1.9.0~git20130225.cec7c9e-0ubuntu1) raring; urgency=low * New upstream snapshot. * d/rules.modules: Install built modules to updates/openvswitch to ensure that they override any kernel provided version of openvswitch. -- James Page Mon, 25 Feb 2013 14:28:46 +0000 openvswitch (1.9.0~git20130207.84b39f2-0ubuntu2) raring; urgency=low * Add DEP-8 tests for dkms, module-assistant and openflow. -- James Page Sun, 17 Feb 2013 20:40:09 +0000 openvswitch (1.9.0~git20130207.84b39f2-0ubuntu1) raring; urgency=low * New upstream snapshot from 1.9 branch: - d/p/support-linux-3.8.patch, d/p/linux-Makefile.main.in-acinclude-preparation-for-lin.patch: Dropped as included upstream. * Fix dependencies for ovsdbmonitor (LP: #1098324): - d/control: Add dependency on python-twisted-conch. * d/control: Bumped Standards-Version, no changes. -- James Page Thu, 07 Feb 2013 15:32:38 +0000 openvswitch (1.9.0~git20130115.ca71f5b-0ubuntu2) raring; urgency=low * Fix typo in debian/openvswitch-controller.default (LP: #1094556). -- Logan Rosen Thu, 17 Jan 2013 19:24:45 +0000 openvswitch (1.9.0~git20130115.ca71f5b-0ubuntu1) raring; urgency=low * New upstream snapshot based on branch-1.9: - d/patches: Dropped all previous patches as all found upstream. - d/*: Synced packaging with upstream packaging changes. - d/control: Add libtool to BD's to support use of snapshot. * Fix compatibility with Linux 3.8 (LP: #1098650): - d/p/support-linux-3.8.patch: Accept Linux 3.8 as a compatible kernel version. - d/p/linux-Makefile.main.in-acinclude-preparation-for-lin.patch: Adjust autoconf checks to correctly detect new kernel header file names. * Fix python test issues caused by long UNIX socket paths: - d/p/handle-unix-socket-long-paths.patch: Workaround long UNIX socket paths by using /proc/self/fd on Linux. -- James Page Wed, 16 Jan 2013 11:22:40 +0000 openvswitch (1.8.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version *** Internal only release *** - New FAQ. Please send updates and additions! - Authors of controllers, please read the new section titled "Action Reproduction" in DESIGN, which describes an Open vSwitch change in behavior in corner cases that may affect some controllers. - ovs-l3ping: - A new test utility that can create L3 tunnel between two Open vSwitches and detect connectivity issues. - ovs-ofctl: - New --sort and --rsort options for "dump-flows" command. - "mod-port" command can now control all OpenFlow config flags. - OpenFlow: - Allow general bitwise masking for IPv4 and IPv6 addresses in IPv4, IPv6, and ARP packets. (Previously, only CIDR masks were allowed.) - Allow support for arbitrary Ethernet masks. (Previously, only the multicast bit in the destination address could be individually masked.) - New field OXM_OF_METADATA, to align with OpenFlow 1.1. - The OFPST_QUEUE request now reports an error if a specified port or queue does not exist, or for requests for a specific queue on all ports, if the specified queue does not exist on any port. (Previous versions generally reported an empty set of results.) - New "flow monitor" feature to allow controllers to be notified of flow table changes as they happen. - Additional protocols are not mirrored and dropped when forward-bpdu is false. For a full list, see the ovs-vswitchd.conf.db man page. - Open vSwitch now sends RARP packets in situations where it previously sent a custom protocol, making it consistent with behavior of QEMU and VMware. - All Open vSwitch programs and log files now show timestamps in UTC, instead the local timezone, by default. -- Open vSwitch team Mon, 16 Jul 2012 16:44:52 +0900 openvswitch (1.7.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - kernel modules are renamed. openvswitch_mod.ko is now openvswitch.ko and brcompat_mod.ko is now brcompat.ko. - Increased the number of NXM registers to 8. - Added ability to configure dscp setting for manager and controller connections. By default, these connections have a DSCP value of Internetwork Control (0xc0). - Added the granular link health statistics, 'cfm_health', to an interface. - OpenFlow: - Added support to mask nd_target for ICMPv6 neighbor discovery flows. - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC) multipart messages. - ovs-ofctl: - Added the "dump-ports-desc" command to retrieve port information using the new port description multipart messages. - ovs-test: - Added support for spawning ovs-test server from the client. - Now ovs-test is able to automatically create test bridges and ports. - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows. - Tripled flow setup performance. - The "coverage/log" command previously available through ovs-appctl has been replaced by "coverage/show". The new command replies with coverage counter values, instead of logging them. -- Open vSwitch team Mon, 30 Jul 2012 17:23:57 +0900 openvswitch (1.6.1-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - Allow OFPP_CONTROLLER as the in_port for packet-out messages. -- Open vSwitch team Mon, 25 Jun 2012 13:52:17 +0900 openvswitch (1.6.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - bonding - LACP bonds no longer fall back to balance-slb when negotiations fail. Instead they drop traffic. - The default bond_mode changed from SLB to active-backup, to protect unsuspecting users from the significant risks of SLB bonds (which are documented in vswitchd/INTERNALS). - Load balancing can be disabled by setting the bond-rebalance-interval to zero. - OpenFlow: - Added support for bitwise matching on TCP and UDP ports. See ovs-ofctl(8) for more information. - NXM flow dumps now include times elapsed toward idle and hard timeouts. - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows controllers more precise control over which OpenFlow messages they receive asynchronously. - New "fin_timeout" action. - Added "fin_timeout" support to "learn" action. - The default MAC learning timeout has been increased from 60 seconds to 300 seconds. The MAC learning timeout is now configurable. - When QoS settings for an interface do not configure a default queue (queue 0), Open vSwitch now uses a default configuration for that queue, instead of dropping all packets as in previous versions. - Logging to console and file will have UTC timestamp as a default for all the daemons. An example of the default format is 2012-01-27T16:35:17Z. ovs-appctl can be used to change the default format as before. - New support for limiting the number of flows in an OpenFlow flow table, with configurable policy for evicting flows upon overflow. See the Flow_Table table in ovs-vswitch.conf.db(5) for more information. - New "enable-async-messages" column in the Controller table. If set to false, OpenFlow connections to the controller will initially have all asynchronous messages disabled, overriding normal OpenFlow behavior. - ofproto-provider interface: - "struct rule" has a new member "used" that ofproto implementations should maintain by updating with ofproto_rule_update_used(). - ovsdb-client: - The new option --timestamp causes the "monitor" command to print a timestamp with every update. - CFM module CCM broadcasts can now be tagged with an 802.1p priority. -- Open vSwitch team Fri, 24 Feb 2012 11:12:48 +0900 openvswitch (1.5.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - OpenFlow: - Added support for querying, modifying, and deleting flows based on flow cookie when using NXM. - Added new NXM_PACKET_IN format. - ovs-ofctl: - Added daemonization support to the monitor and snoop commands. - ovs-vsctl: - The "find" command supports new set relational operators {=}, {!=}, {<}, {>}, {<=}, and {>=}. - ovsdb-tool now uses the typical database and schema installation directories as defaults. -- Open vSwitch team Fri, 01 June 2012 13:06:00 +0900 openvswitch (1.4.3-0ubuntu2) quantal-proposed; urgency=low * Re-enable the openvswitch-datapath-dkms package to enable support for gre tunnels between virtual switches which is not supported in the kernel provided openvswitch module (LP: #1068365). - d/patches/0001->0008*.patch: Cherry picked patches from upstream trunk which enable support for the 3.5 linux kernel and align dkms module naming with kernel module naming. - d/dkms.conf.in: Drop _mod postfix from dkms module names. -- James Page Tue, 23 Oct 2012 17:24:17 +0200 openvswitch (1.4.3-0ubuntu1) quantal; urgency=low * New upstream release (LP: #1057098). * Dropped Debian patches: - debian/patches/debian-changes-1.4.2+git20120612-6 - debian/patches/bug-681955-ovs-ctl-Start-the-rest-of-Open-vSwitch.patch - debian/patches/bug-684057-ovs-ctl-Add-support-for-newer-module-name.patch - debian/patches/debian-changes-1.4.2+git20120612-9 * Dropped Ubuntu patches: - debian/patches/lp1044318-Reset-upper-layer-protocol-info.patch * Remaining changes: - debian/rules, debian/control: Enable hardening wrapper. - debian/control: Disable openvswitch-datapath-dkms package. -- Adam Gandelman Mon, 24 Sep 2012 14:55:07 -0700 openvswitch (1.4.2+git20120612-9ubuntu3) quantal; urgency=low * debian/patches/lp1044318-Reset-upper-layer-protocol-info.patch: Cherry picked upstream patch to avoid critical issues with SNAT/DNAT when OVS is chained with other Linux components. May be dropped with 1.4.3 upload. (LP: #1044318) -- Adam Gandelman Fri, 07 Sep 2012 12:12:03 -0700 openvswitch (1.4.2+git20120612-9ubuntu2) quantal; urgency=low * debian/rules, debian/control: Enable hardening wrapper. -- Chuck Short Mon, 20 Aug 2012 19:39:58 -0500 openvswitch (1.4.2+git20120612-9ubuntu1) quantal; urgency=low * Merge from Debian unstable; remaining changes: - d/control: Disable openvswitch-datapath-dkms package. * Dropped changes: - d/patches/kernel_3.5_support.patch: Superceded by bug-684057-ovs-ctl-Add-support-for-newer-module-name.patch -- James Page Tue, 07 Aug 2012 16:00:53 +0100 openvswitch (1.4.2+git20120612-9) unstable; urgency=low * Apply bug-684057-ovs-ctl-Add-support-for-newer-module-name.patch to allow use of the openvswitch kernel module integrated into 3.3 and later. Closes: #684057. -- Ben Pfaff Mon, 06 Aug 2012 16:59:01 -0700 openvswitch (1.4.2+git20120612-8) unstable; urgency=low * Apply further patches to fix bugs resulting from moving /etc/openvswitch/conf.db to /var/lib/openvswitch in -7. This required applying the following bug fix patches: bug-681880-3-Make-the-location-of-the-database-separately-configu.patch bug-681880-4-tests-Slightly-generalize-utility-function-tests.patch bug-681880-5-util-New-function-follow_symlinks.patch bug-681880-6-lockfile-Be-more-forgiving-about-lockfiles-for-symli.patch bug-681880-7-ovsdb-Do-not-replace-symlinks-by-regular-files-durin.patch bug-681880-8-Fix-a-typo-in-commit-f973f2af2.patch bug-681880-9-dirs-dbdir-default-must-be-based-on-sysconfdir.patch * debian/rules: Configure /var/lib/openvswitch as the database directory instead of working through symlinks. (The symlinks are still created for compatibility with people and existing software that are accustomed to seeing the database in its original location, but the Debian packages themselves never use the symlinks.) * debian/openvswitch-switch.postrm: Also remove /ec/openvswitch/system-id.conf and conf.db backups on purge. * utilities/ovs-pki.in: Use mode 0700 instead of 0733 for openvswitch-pki "incoming" directory, by applying bug-683665-use-mode-700-for-pki-incoming-dir.patch. See the patch for complete rationale. Closes: #683665. Thanks to Andreas Beckmann for reporting this bug. * debian/openvswitch-pki.postinst: Change mode of existing "incoming" directories to 0700 at configure time (see above). -- Ben Pfaff Wed, 01 Aug 2012 11:20:21 -0700 openvswitch (1.4.2+git20120612-7) unstable; urgency=low * Move /etc/openvswitch/conf.db to /var/lib/openvswitch, using symlinks. Closes: #681880. Thanks to Bastian Blank for reporting this bug. This required applying the following bug fix patches: bug-681880-1-lockfile-Fix-hang-locking-through-a-dangling-symlink.patch bug-681880-2-ovsdb-Make-ovsdb-tool-create-work-through-a-dangling.patch * Start the rest of OVS if bridge compatibility is enabled but the kernel bridge module cannot be loaded. Closes: #681955. Thanks to Bastian Blank for reporting this bug. This was fixed by applying the following bug fix patch: bug-681955-ovs-ctl-Start-the-rest-of-Open-vSwitch.patch -- Ben Pfaff Fri, 27 Jul 2012 12:36:03 -0700 openvswitch (1.4.2+git20120612-6) unstable; urgency=low * utilities/automake.mk: Fix duplicate mention of ovs-vsctl in bin_PROGRAMS and bin_SCRIPTS; it should only have been in the former. Closes: #682384. Thanks to Bastian Blank for reporting this bug. -- Ben Pfaff Mon, 23 Jul 2012 09:46:41 -0700 openvswitch (1.4.2+git20120612-5) unstable; urgency=low * debian/openvswitch-controller.postrm: Remove configuration files in /etc/openvswitch-controller on purge. Closes: #682187. Thanks to Andreas Beckmann for reporting this bug. -- Ben Pfaff Fri, 20 Jul 2012 22:33:19 -0700 openvswitch (1.4.2+git20120612-4ubuntu1) quantal; urgency=low * Merge from Debian unstable. Remaining changes: - d/control: Disable openvswitch-datapath-dkms package. - d/patches/kernel_3.5_support.patch: Fix openvswitch-switch startup with 3.5 kernel module name, allowing use of openvswitch without openvswitch-datapath-dkms. -- James Page Thu, 19 Jul 2012 08:51:47 +0100 openvswitch (1.4.2+git20120612-4) unstable; urgency=low * debian/openvswitch-switch.init: Do not modify iptables rules. Closes: #680537. Thanks to Bastian Blank for reporting this bug. -- Ben Pfaff Mon, 16 Jul 2012 12:56:37 -0700 openvswitch (1.4.2+git20120612-3ubuntu1) quantal; urgency=low * Merge from Debian unstable. Remaining changes: - d/control: Disable openvswitch-datapath-dkms package. - d/patches/kernel_3.5_support.patch: Fix openvswitch-switch startup with 3.5 kernel module name, allowing use of openvswitch without openvswitch-datapath-dkms. -- James Page Mon, 16 Jul 2012 14:48:43 +0100 openvswitch (1.4.2+git20120612-3) unstable; urgency=low * debian/control: Add "netbase" dependency to ensure that /etc/protocols is available. Closes: #680537. Thanks to Bastian Blank for reporting this bug. -- Ben Pfaff Mon, 09 Jul 2012 09:50:03 -0700 openvswitch (1.4.2+git20120612-2ubuntu2) quantal; urgency=low * Disable openvswitch-datapath-dkms package (LP: #1018265); it's not compatible with the 3.5 kernel (which provides the openvswitch module) and if users really required the brcompat module and are using an older kernel then they can use openvswitch-datapath-source. -- James Page Wed, 11 Jul 2012 13:00:58 +0100 openvswitch (1.4.2+git20120612-2ubuntu1) quantal; urgency=low * Fix openvswitch-switch startup with 3.5 kernel module name, allowing use of openvswitch without openvswitch-datapath-dkms (LP: #1021078): - d/patches/kernel_3.5_support.patch: Cherry picked patch from upstream VCS to align module naming with openvswitch module in 3.5 kernel. -- James Page Mon, 09 Jul 2012 22:01:41 +0100 openvswitch (1.4.2+git20120612-2) unstable; urgency=low * Apply upstream commit that enables DKMS to automatically build for the running kernel, which seems to be common practice in DMS packaging (launchpad bug #962189) -- Ben Pfaff Tue, 19 Jun 2012 09:40:53 -0700 openvswitch (1.4.2+git20120612-1) unstable; urgency=low * New upstream version fixing the following bugs: o Crash fixes: - ofproto: Fix use after free in ofoperation_complete(). - odp-util: Update ODPUTIL_FLOW_KEY_BYTES for current kernel flow format. - datapath: Check correct return value from skb_gso_segment(). o Possible serious malfunctions: - dpif-netdev: allow for proper destruction of netdev datapaths. - datapath: Validation of IPv6 set port action uses IPv4 header. o Rare annoying corner case: - odp-util: Fix parsing of actions encapsulated within "sample" actions. o Bugs with unknown impact: - Correctly set destination MAC in mf_set_flow_value(). o OpenFlow controller compatibility: - Allow OFPP_CONTROLLER as the in_port for packet-out messages. -- Ben Pfaff Tue, 12 Jun 2012 10:25:08 -0700 openvswitch (1.4.0+git20120426-1) unstable; urgency=low * New upstream release fixing the following bugs: o Broken log rotation. o Use-after-free error when ports disappear. o Minor memory leaks. o Testsuite failures on big-endian architectures. -- Ben Pfaff Thu, 26 Apr 2012 13:46:55 -0700 openvswitch (1.4.0+git20120321-1) unstable; urgency=low * New upstream version including: o Features: - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0. - vswitchd: Make the MAC entry aging time configurable. - mac-learning: Increase MAC learning timeout to 300 seconds. o Bug fixes: - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes queues. - netlink-socket: Increase Netlink socket receive buffer size. - ofproto: Fix code that keeps track of MTU. - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes - bond: Incorrectly reported an error in appctl. - socket-util: Unlink Unix domain sockets that bind but fail to connect. - bridge: Remove unwanted ports at time of ofproto creation. - dpif-linux: Make dpif_linux_port_query_by_name() query only one datapath. - ofproto-dpif: Cleanup STP on ports when disabled on their bridge. - configure: Try to extract kernel source directory from build Makefile. - vswitchd: Always configure a default queue for QoS. - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL. - sflow_agent: Use snprintf() in place of sprintf(). o Packaging: - Move PKI directory to FHS-compliant location. Closes: #661090. Thanks to Andreas Beckmann for reporting this bug. - Use a different way to avoid failing install without kernel module. - Avoid unit test failure when doing "unofficial" builds. - Bump standards-version to 3.9.3. - Remove some useless files from the dkms package. - Clean .pyc files in "clean" target. - Remove po-debconf build dependency. - Build-depend on python-all to pull in all Python versions. - Add missing ${python:Depends} to openvswitch-test package. - Improve long descriptions so as to better describe the packages. - Bump debhelper compat level to 8 and make build-depends consistent. - Fix exit status of openvswitch-switch init script "status" command. - Use provided kernel source dir instead of host kernel version. - Do not run "make" if "configure" fails during DKMS build. - Look in /lib/modules instead of /usr/src for DKMS kernel sources. - Fix dependencies for openvswitch-datapath-dkms package. - Don't install Python modules for obsolete Python versions. - Add dependency on ${misc:Depends} to openvswitch-test o Documentation improvements: - ovsdb-doc: Use minus sign in negative numbers in nroff output. - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a hyphen. - ovsdb-doc: Put NAME section into generated manpage. - Fix typo in manpage. - vswitchd: Document behavior of 802.1p priorities with VLAN splinters. - netdev: Fix typo in error message. - INSTALL.Linux: minor typo * Many thanks to Thomas Goirand for contributing many of the packaging fixes listed above. * This version fixes most of the lintian errors described in bug #663051, but a few remain, so this upload does not close that bug. I believe that this upload should be suitable for downgrading that bug's severity. -- Ben Pfaff Wed, 21 Mar 2012 10:00:28 -0700 openvswitch (1.4.0-2+nmu1) unstable; urgency=low * Non maintainer upload. * Removes all patches in debian/patches, because they are patching stuff inconditionally in debian/*, and this should be applied by default. * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that the kernel module builds as expected (Closes: #659685). -- Thomas Goirand Thu, 08 Mar 2012 08:46:24 +0000 openvswitch (1.4.0-2) unstable; urgency=low * Use explicit DKMS variable for kernel source directory - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch - 0001-debian-Use-provided-kernel-source-dir.patch - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch - (closes: #659685) * Don't install Python modules for obsolete Python versions - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch -- Simon Horman Tue, 14 Feb 2012 11:43:13 +0900 openvswitch (1.4.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - Compatible with Open vSwitch kernel module included in Linux 3.3. - New "VLAN splinters" feature to work around buggy device drivers in old Linux versions. (This feature is deprecated. When broken device drivers are no longer in widespread use, we will delete this feature.) See ovs-vswitchd.conf.db(5) for more information. - OpenFlow: - Added ability to match on IPv6 flow label through NXM. - Added ability to match on ECN bits in IPv4 and IPv6 through NXM. - Added ability to match on TTL in IPv4 and IPv6 through NXM. - Added ability to modify ECN bits in IPv4. - Added ability to modify TTL in IPv4. - ovs-vswitchd: - Don't require the "normal" action to use mirrors. Traffic will now be properly mirrored for any flows, regardless of their actions. - Track packet and byte statistics sent on mirrors. - ovs-appctl: - New "fdb/flush" command to flush bridge's MAC learning table. - ovs-test: - A new distributed testing tool that allows one to diagnose performance and connectivity issues. This tool currently is not included in RH or Xen packages. - RHEL packaging now supports integration with Red Hat network scripts. - Debian: Depend on python (>= 2.7) | python-argparse instead of python-argparse to avoid pulling in python2.6 (closes: #653645) -- Open vSwitch team Mon, 30 Jan 2012 23:36:00 +0000 openvswitch (1.3.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - OpenFlow: - Added an OpenFlow extension which allows the "output" action to accept NXM fields. - Added an OpenFlow extension for flexible learning. - Bumped number of NXM registers from four to five. - ovs-appctl: - New "version" command to determine version of running daemon. - If no argument is provided for "cfm/show", displays detailed information about all interfaces with CFM enabled. - If no argument is provided for "lacp/show", displays detailed information about all ports with LACP enabled. - ovs-vswitchd: - The software switch now supports 255 OpenFlow tables, instead of just one. By default, only table 0 is consulted, but the new NXAST_RESUBMIT_TABLE action can look up in additional tables. Tables 128 and above are reserved for use by the switch itself; please use only tables 0 through 127. - Add support for 802.1D spanning tree (STP). - Fragment handling extensions: - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4 fields are made available for matching in fragments with offset 0. - New NXM_NX_IP_FRAG match field for matching IP fragments (usable via "ip_frag" in ovs-ofctl). - New ovs-ofctl "get-frags" and "set-frags" commands to get and set fragment handling policy. - CAPWAP tunneling now supports an extension to transport a 64-key. By default it remains compatible with the old version and other standards-based implementations. - Flow setups are now processed in a round-robin manner across ports to prevent any single client from monopolizing the CPU and conducting a denial of service attack. - Added support for native VLAN tagging. A new "vlan_mode" parameter can be set for "port". Possible values: "access", "trunk", "native-tagged" and "native-untagged". - test-openflowd has been removed. Please use ovs-vswitchd instead. -- Open vSwitch team Mon, 09 Dec 2011 23:36:00 +0000 openvswitch (1.2.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - New "ofproto" abstraction layer to ease porting to hardware switching ASICs. - Packaging for Red Hat Enterprise Linux 5.6 and 6.0. - Datapath support for Linux kernels up to 3.0. - OpenFlow: - New "bundle" and "bundle_load" action extensions. - Database: - Implement table unique constraints. - Support cooperative locking between callers. - ovs-dpctl: - New "-s" option for "show" command prints packet and byte counters for each port. - ovs-ofctl: - New "--readd" option for "replace-flows". - ovs-vsctl: - New "show" command to print an overview of configuration. - New "comment" command to add remark that explains intentions. - ovs-brcompatd has been rewritten to fix long-standing bugs. - ovs-openflowd has been renamed test-openflowd and moved into the tests directory. Its presence confused too many users. Please use ovs-vswitchd instead. - New ovs-benchmark utility to test flow setup performance. - A new log level "off" has been added. Configuring a log facility "off" prevents any messages from being logged to it. Previously, "emer" was effectively "off" because no messages were ever logged at level "emer". Now, errors that cause a process to exit are logged at "emer" level. - "configure" option --with-l26 has been renamed --with-linux, and --with-l26-source has been renamed --with-linux-source. The old names will be removed after the next release, so please update your scripts. - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and datapath/linux-2.6/compat-2.6 directories. - Feature removals: - Dropped support for "tun_id_from_cookie" OpenFlow extension. Please use the extensible match extensions instead. - Removed the Maintenance_Point and Monitor tables in an effort to simplify 802.1ag configuration. - Performance and scalability improvements - Bug fixes -- Open vSwitch team Wed, 03 Aug 2011 14:43:00 +0000 openvswitch (1.1.1-1) unstable; urgency=low [ Open vSwitch team ] * Bug fixes. [ Simon Horman ] * docs: Suppress warning marcro DD not defined (upstream commit 58f870d0) * debian: Make openvswitch depend on Python (upstream commit aa41cb61) * debian: Don't begin openvswitch-pki description with article. (upstream commit bc6bb66) * Debian: Add ${misc:Depends} dependency to python-openvswitch * Debian: Update standards version from 3.9.1 to 3.9.2 * Debian: ${source:Version} dependency on python openvswitch * Debian: ${source:Version} dependency for python openvswitch * Switch to dpkg-source 3.0 (quilt) format - For local non-debian/ patches (above) -- Simon Horman Wed, 15 Jun 2011 10:46:15 +0900 openvswitch (1.1.0-1) unstable; urgency=low [ Open vSwitch team ] * New upstream version - Ability to define policies over IPv6 - LACP - 802.1ag CCM - Support for extensible match extensions to OpenFlow - QoS: - Support for HFSC qdisc. - Queue used by in-band control can now be configured. - Kernel: - Kernel<->userspace interface has been reworked and should be close to a stable ABI now. - "Port group" concept has been dropped. - GRE over IPSEC tunnels - Bonding: - New active backup bonding mode. - New L4 hashing support when LACP is enabled. - Source MAC hash now includes VLAN field also. - miimon support. - Greatly improved handling of large flow tables - ovs-dpctl: - "show" command now prints full vport configuration. - "dump-groups" command removed since kernel support for port groups was dropped. - ovs-vsctl: - New commands for working with the new Managers table. - "list" command enhanced with new formatting options and --columns option. - "get" command now accepts new --id option. - New "find" command. - ovs-ofctl: - New "queue-stats" command for printing queue stats. - New commands "replace-flows" and "diff-flows". - Commands to add and remove flows can now read from files. - New --flow-format option to enable or disable NXM. - New --more option to increase OpenFlow message verbosity. - Removed "tun-cookie" command, which is no longer useful. - ovs-controller enhancements for testing various features. - New ovs-vlan-test command for testing for Linux kernel driver VLAN bugs. New ovs-vlan-bug-workaround command for enabling and disabling a workaround for these driver bugs. - OpenFlow support: - "Resubmit" actions now update flow statistics. - New "register" extension for use in matching and actions, via NXM. - New "multipath" experimental action extension. - New support for matching multicast Ethernet frames, via NXM. - New extension for OpenFlow vendor error codes. - New extension to set the QoS output queue without actually sending to an output port. - Open vSwitch now reports a single flow table, instead of separate hash and wildcard tables. This better models the current implementation. - New experimental "note" action. - New "ofproto/trace" ovs-appctl command and associated utilities to ease debugging complex flow tables. - Database: - Schema documentation now includes an entity-relationship diagram. - The database is now garbage collected. In most tables, unreferenced rows will be deleted automatically. - Many tables now include statistics updated periodically by ovs-vswitchd or ovsdb-server. - Every table now has an "external-ids" column for use by OVS integrators. - There is no default controller anymore. Each bridge must have its controller individually specified. - The "fail-mode" is now a property of a Bridge instead of a Controller. - New versioning and checksum features. - New Managers table and manager_options column in Open_vSwitch table for specifying managers. The old "managers" column in the Open_vSwitch table has been removed. - Many "name" columns are now immutable. - Feature removals: - Dropped support for XenServer pre-5.6.100. - Dropped support for Linux pre-2.6.18. - Dropped controller discovery support. - Dropped "ovs-ofctl status" and the OpenFlow extension that it used. Statistics reporting in the database is a rough equivalent. - Dropped the "corekeeper" package (now separate, at http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper). - Performance and scalability improvements - Bug fixes [ Simon Horman ] * Add the following fixes from upstream branch-1.1 - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in dpif_linux_is_internal_device(). - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel module. - 002d4a3 vswitch: Improve schema documentation. - 58bd294 cfm: Fix broken fault logic. - c042664 bridge: Run once before configuring CFM. * Switch to dpkg-source 3.0 (quilt) format -- Simon Horman Wed, 27 Apr 2011 17:11:10 +0900 openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low * Git snapshot, including - tests: Fix Y2011 bug in testsuite (closes: #609506) -- Simon Horman Wed, 12 Jan 2011 08:34:35 +0900 openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low * Git snaptshot -- Simon Horman Thu, 06 Jan 2011 11:11:55 +0900 openvswitch (1.1.0~pre2-5) unstable; urgency=low * Open vSwitch only works on Linux so set the Architecture of binary packages to linux-any accordingly -- Simon Horman Tue, 23 Nov 2010 07:55:19 +0900 openvswitch (1.1.0~pre2-4) unstable; urgency=low * Add procps to Build-Depends (closes: #602891) -- Simon Horman Tue, 16 Nov 2010 06:46:17 +0900 openvswitch (1.1.0~pre2-3) unstable; urgency=low * Remove the corekeeper package as it isn't strongly related to Open vSwitch. It has subsequently been broken off into a separate source repository and may be uploaded as its own debian source package. http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary (closes: #602946) * Avoid the use of long socket names. (closes: #602891, closes: #602911) -- Simon Horman Thu, 11 Nov 2010 06:35:05 +0900 openvswitch (1.1.0~pre2-2) unstable; urgency=low * Clarify licensing of files in xenserver/ -- Simon Horman Thu, 23 Sep 2010 10:56:18 +0900 openvswitch (1.1.0~pre2-1) unstable; urgency=low * New upstream version - Bug fixes -- Simon Horman Wed, 15 Sep 2010 18:28:59 +0900 openvswitch (1.1.0~pre1-1) unstable; urgency=low * New upstream version - OpenFlow 1.0 slicing (QoS) functionality - Python bindings for configuration database (no write support) - Performance and scalability improvements - Bug fixes -- Open vSwitch team Tue, 31 Aug 2010 23:20:00 +0000 openvswitch (1.0.1-1) unstable; urgency=low * New upstream version. -- Open vSwitch team Mon, 17 May 2010 10:36:00 +0000